Portable Industrial Vacuum Units
Fully portable by forklift and therefore suitable for material collection anywhere on site in all industrial and commercial applications, IBS offer a wide range of Industrial vacuum loaders. (Industrial Vacuum Machines)
Example of a portable industrial vacuum pump unit:
FVP 25 Portable Heavy Duty High Performance Industrial Vacuum Loader.
Able to collect a range of materials including fine particles through to aggregates up to 50 mm in size, the unit has a maximum loading rate of 3 tons per hour over 40 meters or further if utilised with a vacuum interceptor skip and fixed pipework system.
No obligation site surveys. Units available for trial purposes.
Units can also be supplied on short or long term hire, contract hire or lease.
The FVP 25 has been designed for :
High performance
- Excellent conveying rates
- Utilises an energy saving electric motor on soft start (running on a 32A power
supply) and a high quality tri-lobe positive displacement vacuum pump - Quiet operation
- Excellent filtration
Build quality and reliability
- Very robust - exceeds that of our competitors whilst remaining very cost effective
- Low running and maintenance costs
Versatility
- Unlike our competitors machines the FVP25 is suitable for wet and dry materials and sludges
- Super flexible hose and a selection of vacuum tools are available
Adaptability
- The FVP25 can be used to power a centralised vacuum system
to feed material back into the process or for bagging purposes.
Portability
- The unit has 1 cubic meter integral tipping skip
Productivity
- The FVP25 can be supplied with an additional 1 cubic meter fork lift
intercept sealed skip, bottom dump intercept hopper or filter hopper.
Larger skips are also available
Share
IBS offer a wide range or industrial vacuums. Contact us for more details.
Wastes collection by portable vacuum power
At IBS Ltd we can offer you a comprehensive solutions for vacuuming wet and dry spillage and dust through the use of our extensive industrial vacuum loaders. We offer a simple and effective portable air conveying system for cleaning, recycling, collecting waste and split product.
Contact us for more info
Innovative vacuum system integrated with the diesel Fiat Daily Van, quickly operation, flexible, cheap and able to drive with only a driving B class license.
None additional auxillary engine, the torque force has been trasmitted to the roots vacuum producer directly from the integrated primary transmission.
IBS were requested to provide a solution to pick up stone dust and spent stone off conveyors in 3 large stone crushers on a large quarry. Click here to download the full story
Speciality cement plant cleaning and recycling - FVP 25 on bottom dump hopper
Cleaning contractor in Ireland using SV18 EC machine (25hp) onepiece unit to clean Animal feed mill- 40metres of hose 3 inch and 2 inch
Steel castings furnace cleaning- FVP on dump hopper - big bagging unit  30m hose 3 inch
Collection of fine wood dust on a biomass and animal bedding plant- FVP 25 (25HP ) and 30 metres of hose and tool kit.
Cleaning under a railhead conveyor - wet and dry spillage at 60 metres distance- FVP 25 (25HP)- 60 metres of hose.
Steel works - Coal injection plant- 6M3 Trailer Skip to work with Onsite vacuum units-
Asphalt tower cleaning and plant clean up- Model SV18ECX 30-40m 3 inch hose 0nepiece unit with level sensor
Site Cleanup - September 2015
Task
IBS were requested to provide a solution to pick up filler dust and small stone collection
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered the 25hp FV P on a tipping skip with 30 metres of hose and a 32a supply requirement.
System components
- 1 x FVP 25 on 1m3 tipping skip
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 10m length of 2 inch hose
- 2 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Vehicle Cleaning - dust removal and dry waste - fire prevention - WASTE RECYLER
Task
IBS were requested to provide a solution to pick up dust and spillage around large onsite
plant - scredder/ bucket loader/ JCB / Bobcat.
Options
- We had to provide a unit that can be moved about and emptied easily.
- Had to be easy to operate and empty.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered an COMPACT Vacuum on a skip with 30 metres of hose and a 32a supply requirement.
System components
- 1 x compact vacuum 16.5kw with 0.9m3 integrated hopper
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 10m length of 2 inch hose
- 2 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Building products production - July 2015
Task
IBS were requested to provide a solution to pick up dust and spillage around conveyors
and plant onsite - we were asked to provide a solution where an ibc can be placed underneath to be emptied.
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at the end of the shift and evenings
Solution
We offered the 16.5kw Standvac on legs with HEPA FILTER and counterbalance emptying.
System components
- 1 x Standvac 16.5kw on leg
- 1 x 32 cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 4 inch hose
- 2 x 3 inch hose
- 1 x 3 to 2 inch reducer
- 1 x ibc
Task
IBS were requested to provide a solution to pick up ash dust around site including in screw
conveyors/ on the various floors as part of a bi annual shutdown
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered an FVP 25 on a dump hopper with 60 metres of hose and a 32a supply requirement.
System components
- 1 x FVP 25 on 1m3 dump hopper (25HP)
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 2 x 10m length of 2 inch hose
- 4 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Site cleaning - Floor and ceilings Manufacture
Task
IBS were requested to provide a solution to pick up fine ceiling tile dust and larger spills around site
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered an FVP 25 on a skip and also a SV18 E C 1M3 on a skip with 30 metres of hose and a 32a supply requirement.
System components
- 1 x FVP 25 on 1m3 tipping skip (25HP)
- 1x SV18 E C 1M3 (25HP)
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 10m length of 2 inch hose
- 2 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Task
IBS were requested to provide a solution to pick up ash dust around site including in screw
conveyors/ on the various floors as part of a bi annual shutdown
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered an FVP 25 on a dump hopper with 60 metres of hose and a 32a supply requirement.
System components
- 1 x FVP 25 on 1m3 dump hopper (25HP)
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 2 x 10m length of 2 inch hose
- 4 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Task
IBS were requested to provide a solution to pick up ceramic tiles in a fluidised gas bed .
These had to be collected in big bags for disposal purposes.
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used in a short time window.
Solution
We offered the 22kw SV22 E-C 1M3 on a tipping skip with 40 metres of hose and a1m3
vacuum hopper to collect the media on a 4 inch line.
Solution
We offered the 22kw SV22 E-C 1M3 on a tipping skip with 40 metres of hose and a1m3
vacuum hopper to collect the media on a 4 inch line.
- 1 x SV22 E C 1ECX on 1m3 tipping skip
- 1x 1m3 Vacuum hopper
- 1 x 63 a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 4 x 4 inch hose
- 1 x 3 to 2 inch
Foundry cleaning Portable vacuum Solutions – August 2015
Task
IBS were requested to provide a solution to pick up foundry dust and foundry sands in a
basement application and under conveyors.
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered the 22kw SV22 E-C 1M3 on a tipping skip with 30 metres of hose and a 63a
supply requirement.
System components
- 1 x SV22 E C 1ECX on 1m3 tipping skip
- 1 x 63 a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 10m length of 2 inch hose
- 2 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Task
IBS were requested to provide an effective vacuum system following a trial of several units. We identified the power requirements needed and the complete pipework system. The unit is a frame mounted 26kw roots system with a 0.7m3 skip underneath.
Options
- Supply a total portable vacuum recovery system.
- Supply a suitable system to carry out many onsite cleaning tasks where concerned.
- Design and install fixed pipework system at all levels of asphalt plant.
Solution
As customer was on a small budget for such a project IBS had to supply all of the above on a light budget. We achieved this by negotiating with both the supplier and customer to achieve a correct result.
System components
- 1x sv26cav vacuum (35hp)
- 1 x fixed pipework approx 40m
- 1x 60 m 3 inch and 2 inch hose
Industrial Vacuums
IBS offer a wide range or industrial vacuums. Contact us for more details.
Industrial Vacuum Services
Wastes collection by portable vacuum power
At IBS Ltd we can offer you a comprehensive solutions for vacuuming wet and dry spillage and dust through the use of our extensive industrial vacuum loaders. We offer a simple and effective portable air conveying system for cleaning, recycling, collecting waste and split product.
Contact us for more info
Innovative vacuum system integrated with the diesel Fiat Daily Van, quickly operation, flexible, cheap and able to drive with only a driving B class license.
None additional auxillary engine, the torque force has been trasmitted to the roots vacuum producer directly from the integrated primary transmission.
Portable Vacuum Application Stories
IBS were requested to provide a solution to pick up stone dust and spent stone off conveyors in 3 large stone crushers on a large quarry. Click here to download the full story
Speciality cement plant cleaning and recycling - FVP 25 on bottom dump hopper
Cleaning contractor in Ireland using SV18 EC machine (25hp) onepiece unit to clean Animal feed mill- 40metres of hose 3 inch and 2 inch
Steel castings furnace cleaning- FVP on dump hopper - big bagging unit  30m hose 3 inch
Collection of fine wood dust on a biomass and animal bedding plant- FVP 25 (25HP ) and 30 metres of hose and tool kit.
Cleaning under a railhead conveyor - wet and dry spillage at 60 metres distance- FVP 25 (25HP)- 60 metres of hose.
Steel works - Coal injection plant- 6M3 Trailer Skip to work with Onsite vacuum units-
Asphalt tower cleaning and plant clean up- Model SV18ECX 30-40m 3 inch hose 0nepiece unit with level sensor
Vacuum Loader Solutions
Site Cleanup - September 2015
Task
IBS were requested to provide a solution to pick up filler dust and small stone collection
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered the 25hp FV P on a tipping skip with 30 metres of hose and a 32a supply requirement.
System components
- 1 x FVP 25 on 1m3 tipping skip
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 10m length of 2 inch hose
- 2 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Vehicle Cleaning - dust removal and dry waste - fire prevention - WASTE RECYLER
Task
IBS were requested to provide a solution to pick up dust and spillage around large onsite
plant - scredder/ bucket loader/ JCB / Bobcat.
Options
- We had to provide a unit that can be moved about and emptied easily.
- Had to be easy to operate and empty.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered an COMPACT Vacuum on a skip with 30 metres of hose and a 32a supply requirement.
System components
- 1 x compact vacuum 16.5kw with 0.9m3 integrated hopper
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 10m length of 2 inch hose
- 2 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Building products production - July 2015
Task
IBS were requested to provide a solution to pick up dust and spillage around conveyors
and plant onsite - we were asked to provide a solution where an ibc can be placed underneath to be emptied.
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at the end of the shift and evenings
Solution
We offered the 16.5kw Standvac on legs with HEPA FILTER and counterbalance emptying.
System components
- 1 x Standvac 16.5kw on leg
- 1 x 32 cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 4 inch hose
- 2 x 3 inch hose
- 1 x 3 to 2 inch reducer
- 1 x ibc
Energy From Waste Plant
Task
IBS were requested to provide a solution to pick up ash dust around site including in screw
conveyors/ on the various floors as part of a bi annual shutdown
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered an FVP 25 on a dump hopper with 60 metres of hose and a 32a supply requirement.
System components
- 1 x FVP 25 on 1m3 dump hopper (25HP)
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 2 x 10m length of 2 inch hose
- 4 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Site cleaning - Floor and ceilings Manufacture
Task
IBS were requested to provide a solution to pick up fine ceiling tile dust and larger spills around site
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered an FVP 25 on a skip and also a SV18 E C 1M3 on a skip with 30 metres of hose and a 32a supply requirement.
System components
- 1 x FVP 25 on 1m3 tipping skip (25HP)
- 1x SV18 E C 1M3 (25HP)
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 10m length of 2 inch hose
- 2 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Task
IBS were requested to provide a solution to pick up ash dust around site including in screw
conveyors/ on the various floors as part of a bi annual shutdown
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered an FVP 25 on a dump hopper with 60 metres of hose and a 32a supply requirement.
System components
- 1 x FVP 25 on 1m3 dump hopper (25HP)
- 1 x 32a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 2 x 10m length of 2 inch hose
- 4 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Media Transfer - August 2015
Task
IBS were requested to provide a solution to pick up ceramic tiles in a fluidised gas bed .
These had to be collected in big bags for disposal purposes.
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used in a short time window.
Solution
We offered the 22kw SV22 E-C 1M3 on a tipping skip with 40 metres of hose and a1m3
vacuum hopper to collect the media on a 4 inch line.
Solution
We offered the 22kw SV22 E-C 1M3 on a tipping skip with 40 metres of hose and a1m3
vacuum hopper to collect the media on a 4 inch line.
- 1 x SV22 E C 1ECX on 1m3 tipping skip
- 1x 1m3 Vacuum hopper
- 1 x 63 a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 4 x 4 inch hose
- 1 x 3 to 2 inch
Foundry cleaning Portable vacuum Solutions – August 2015
Task
IBS were requested to provide a solution to pick up foundry dust and foundry sands in a
basement application and under conveyors.
Options
- We had to provide a unit that can be moved about and emptied easily.
- We had to be a certain weight as limited with lifting equipment onsite.
- We had to be an easy to operate system that could be used at night and weekend
Solution
We offered the 22kw SV22 E-C 1M3 on a tipping skip with 30 metres of hose and a 63a
supply requirement.
System components
- 1 x SV22 E C 1ECX on 1m3 tipping skip
- 1 x 63 a cable
- 1 x 3 inch fluidiser
- 1 x 2 inch tool kit
- 1 x 10m length of 2 inch hose
- 2 x 10m length of 3 inch hose
- 2 x 3 inch hose joiner
- 1 x 3 to 2 inch reducer
Task
IBS were requested to provide an effective vacuum system following a trial of several units. We identified the power requirements needed and the complete pipework system. The unit is a frame mounted 26kw roots system with a 0.7m3 skip underneath.
Options
- Supply a total portable vacuum recovery system.
- Supply a suitable system to carry out many onsite cleaning tasks where concerned.
- Design and install fixed pipework system at all levels of asphalt plant.
Solution
As customer was on a small budget for such a project IBS had to supply all of the above on a light budget. We achieved this by negotiating with both the supplier and customer to achieve a correct result.
System components
- 1x sv26cav vacuum (35hp)
- 1 x fixed pipework approx 40m
- 1x 60 m 3 inch and 2 inch hose